Original ATI AIW Output Adapter. This adapter has a male 8-pin connector on one end that connects to your All-in-Wonder card. This adapter is also known as "Cable 4801". The other end of the cable has the following connectors: 1. Male stereo audio plug to connect to the "Line-in" on your Sound Card. This is the top plug on the picture. 2. Female Composite Video "RCA" connector. This is the middle connector on the picture. You will need a "male-to-male RCA" video cable to connect to your video device. Note, it should be a "video" cable - do not consider cheap cables if you want good video quality. Consider our Pro Video cables. 3. Female S-Video 4 pin mini DIN connector. This is the bottom connector on the picture. You will need a male-to-male S-Video Cable to connect to the S-Video "in" jack of your video device (TV, camcorder, LCD projector or VCR). Consider the best S-Video Cables interconnect cables. You might also consider our S-Video Splitter to connect to your S-Video TV (use it as a monitor) or our S-Video Switch. To connect the video output of your ATI All-in-Wonder card to a SCART input (European Peritel connector) of your TV, consider our SCART adatper below, coupled with our Video cables. Click on the picture below to see the Male 8-pin plug that is on the other end of this adapter. To send the audio from your sound card's "Line-out" consider our PC Audio Cables. This adapter is compatible with the following ATI Products: - ALL IN WONDER 128 - ALL IN WONDER 128 PRO - ALL IN WONDER RAGE I AND II/II+ Availability: ships same day. |
| ||
| ATI 8-pin plug on the 4 & 3-headed adapters | |
| ||
| ATI AIW 4-Headed A/V Input Adapter | |
| ||
| RCA to RCA A/V Patch Cables | |
| ||
| ATI Products |
| This page was updated on |