Our CATV Transceiver supports CATV Channels 2-77; VHF Channels 2-13; and FM broadcast band. If you need CATV Channels 2-142, please consider our CATV Broadband Transceiver below. Our CATV Transceiver allows traditional 75-ohm coaxial cable to be replaced by one-pair Unshielded Twisted Pair (UTP) in the CATV, VHF and FM environments in certain applications. Used in pairs, the CATV Transceiver allows broadband CATV equipment to be integrated into structured cabling systems thereby allowing CATV equipment to be moved or added to any convenient modular wall outlet. Features: - Bandwidth up to 550 MHz. - Male F connector on one end. - Female RJ45 connector on the other end. - 330 ft. (100m) maximum distance via Cat 5 UTP depending on frequency. - Uses pins 7 & 8 on the RJ45. You will be able to receive CATV channels via Cat5, providing the input signal level is strong enough. Sometimes the CATV service provider installs an amplifier to boost the signal. The highest CATV channel supported by this CATV Transceiver (500006) is CATV channel 77. See our other transceiver below if you need higher channel support. The CATV Transceiver are passive and work in pairs. They allow RG6 coax cable to be replaced by Cat5 twisted pair. They do not alter the signal in any way. Availability: Product 500006 has been discontinued, however, we ship the new version, Product 500302. CATV Video Transceiver (see 500302) 500006US$70.00, 2_for_US$140.00 CATV Broadband Transceiver CATV Broadband Transceiver Part # 500302US$70.00, 2_for_US$140.00 AV over Cat 5 CATV Cabling article in PDF format CATV Balun Data Sheet in PDF format. We offer multiple shipping options with no additional charges from the published rates from UPS or the USPS.