Composite Video and data over Fiber
Send Composite Video and data over Fiber up to 6,500 feet. Our Composite Video and Data over Fiber Kit consists of a transmitter, receiver and two power supplies.
The transmitter and receiver have a BNC connector for the composite video; a terminal block for data; and an ST connector for the fiber. The data signal wires are stripped and inserted on the terminal block receptacles and the wire is held by tightening the screw on the terminal block.
Please see specifications below.
The transmitter and receiver have a BNC connector for the composite video; a terminal block for data; and an ST connector for the fiber. The data signal wires are stripped and inserted on the terminal block receptacles and the wire is held by tightening the screw on the terminal block.
Please see specifications below.
Accessories
| ||
| ||
|
Specifications for Composite Video and Data over Fiber:
Video interface number: 1- channel video
Video interface form：BNC
Video input & output impedance: 75 Ω
Video input & output voltage : 1VP - P
Bandwidth of video : 8MHz
Differential gain: （10%-90%APL） DG <0.5%
Differential phase:（10%-90%APL） DP <0.4�
Weighted signal-to-noise ratio:S/N ≥ 70dB
Connectors:
Video Connector： BNC
Fiber Connector： FC/PC or ST/PC
Power supply Connector： 2 port Power supply
Temperature range: -30 ℃～+75 ℃
Storage environment ：-40 ℃～+85 ℃
relative humidity ：0～95%
power supply voltage： AC220V/50Hz
MTBF：≥ 100,00 hours
Video interface number: 1- channel video
Video interface form：BNC
Video input & output impedance: 75 Ω
Video input & output voltage : 1VP - P
Bandwidth of video : 8MHz
Differential gain: （10%-90%APL） DG <0.5%
Differential phase:（10%-90%APL） DP <0.4�
Weighted signal-to-noise ratio:S/N ≥ 70dB
Connectors:
Video Connector： BNC
Fiber Connector： FC/PC or ST/PC
Power supply Connector： 2 port Power supply
Temperature range: -30 ℃～+75 ℃
Storage environment ：-40 ℃～+85 ℃
relative humidity ：0～95%
power supply voltage： AC220V/50Hz
MTBF：≥ 100,00 hours