VGA and Stereo Audio and Composite Video and Audio over Cat5 Extender Box Receiver

VGA and Stereo Audio and Composite Video and Audio over Cat5 Extender Box Receiver
Item# SV-29209a
$229.99

    Product Code: SV-29209a
  • The TruLink VGA + Stereo Audio + Composite Video + Audio over Cat5 allows VGA video, Stereo Audio, Composite Video and Audio signals to be extended over two Cat5/Cat5e/Cat6 unshielded twisted pair cables up to 300ft
  • VGA video is supported at up to a 1920x1200 video resolution, while Composite Video is supported at a 480i video resolution
  • The 3,5mm port supports Stereo Audio, while the two RCA Audio inputs accept a Stereo Audio input, mix the two channels of audio into a single signal which is sent to the receiver then duplicated so that both channels of audio are sent to the white and to the red RCA output ports at the receiver
  • This solution is compatible with any operating system and is truly plug and play with no drivers or software required
  • The transmitter and receiver are available in either a wall plate or box form factor and are interoperable allowing this solution to meet the needs of the installation environment
  • In addition, this solution utilizes TruChoice(TM) power providing the flexibility to power at either the transmitter or receiver end
  • TruPair(TM) technology allows the Extended Display Identification Data (EDID) signals, i
  • e
  • communication of the display_s capabilities, to be communicated, ensuring that the content from the source is sent at the optimal resolution for the display
  • Built-in power surge protection and high ground loop immunity ensure high performance signal extension
  • View compatible transmitters, additional receivers and kit options on the VGA + Stereo Audio + Composite Video + Audio over Cat5 Product Family Sheethttps://www
  • svideo
  • com (/docs/matrices/C2G_AVOCmatrix_VGA_Composite
  • pdf)*Longer distances can be achieved at lower resolutions
  • Note: Stranded Cat5e/6 cables may be used for extension applications up to 250ft
  • Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments
  • For best performance use a Cat6 Solid Shielded Patch Cable ("https://search
  • svideo
  • com/?N=0&Ntt=43122%20and%2043123%20and%2043124&p=e") * Download the manual from the Support tab * Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab