Solderless S-Video Connector with Screw Terminals.
This connector has an S-Video female 4-pin mini DIN connector on one end and a terminal block on the other end. The terminal block has four screw terminals that are labelled L, C and two grounds. The connector can also be set up as a "bulkhead" connector and ships with a washer and nut that can be screwed on to be tightened.
The connector can be mounted on a 1/2" hole or can be assembled with colored keystone inserts or on chassis panels with colored plastic washers. The individual "U" shaped screw terminals provide a solid and secure wiring termination. A plastic tie can be used to secure the cable to the connector by inserting the tie into two slots on the back of the connector.