Discontinued

200ft HDMI Optical Runner Cable
200ft HDMI Optical Runner Cable
Item# SV-60126a
$889.99
Contact us about Availability or Special Price.

HDMI Optical Series is designed to be the standard for in-wall HDMI audio/video installations, it boasts an 18Gbps bandwidth, a diameter of just a half inch and a plenum rated jacket. Using pre-terminated break-away flying leads and wall plates with an in-wall runner provides a flexible, efficient, high quality connection for all types of equipment, with no field terminations.

Available in the following lengths:
  • 35 ft.
  • 50 ft.
  • 65 ft.
  • 80 ft.
  • 100 ft.
  • 125 ft.
  • 150 ft.
  • 200 ft.
  • 500 ft.
  • 750 ft.
  • 1000 ft.


  • Utilize this Plenum, OFNP-Rated fiber runner cable for in-wall installations that require the cable to be run through an air handling space or air plenum. This solution supports up to a 4k resolution, while providing enough bandwidth to serve the audio/video needs of commercial applications from classrooms to lecture halls and auditoriums to boardrooms for years to come.

    Note: Some HDMI source devices are unable to output the power required to send A/V signals over the Optical runner cable which results in no image being displayed. In those instances, an HDMI Voltage Inserter may be required. Each complete Optical solution requires a break-away flying lead or wall plate to terminate each end of the runner cable. Each runner requires (2) break-away flying leads OR (1) wall plate and (1) break-away flying lead.

    Optical Runners require the flying leads and/or wall plates in order to function properly. The Runner cables cannot be used to connect directly to source/display devices.

    Optical Runners are directional cables that require the TX to be installed at the source side and the RX to be installed at the display side. Optical Fiber Pulling Eye sold separately.